3M™ 7093 P100 HEPA Particulate Filter | GLT Products

3M™ 7093 P100 HEPA Particulate Filter

The 3M™ 7093 P100 Particulate Filter provides up to 25% improvement in breathing resistance. The filter has a low-profile design for increased field of vision. Innovative solid-top air-inlet design requires no tape during showering or decontamination and protects and increases the service life of the filter. This filter is widely used in the asbestos abatement industry.

NIOSH approved for environments containing certain oil and non-oil based particles. The filters can be connected directly to 3M 6000 and 7000 Series Respirators or can be used with 3M Respirators 6000 Series Cartridges (requires the 3M 502 Filter Adapter). 

When properly fitted the 3M 7093 P100 Filter can be used in a variety of applications including exposure to lead, asbestos, cadmium, arsenic, and MDA for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full face respirators. Full face must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Not for use in environments that are immediately dangerous to life or health.


National Insulation Association logo
Central States Insulation Association logo
Midwest Insulation Contractors Association Logo
Southeastern Insulation Contractors Association logo
Southwest Insulation Contractors Association logo
Home  |  Sitemap  |  Company  |  Contact Us  |  Careers
© 2021 Great Lakes Textiles. All rights reserved. Admin Login »